Electronic Design for Hazardous Areas

Development of intrinsically safe circuits.

Devel­op­ing ATEX or IECEx-com­pli­ant hard­ware requires a care­ful bal­ance between func­tion­al design and explo­sion pro­tec­tion require­ments.

Each com­po­nent must be assessed for its volt­age, cur­rent, and pow­er rat­ings, tem­per­a­ture behav­ior, and fault modes, while ensur­ing the over­all solu­tion remains prac­ti­cal to imple­ment and clear­ly doc­u­ment­ed for cer­ti­fi­ca­tion.

The key chal­lenge lies in align­ing the com­plex­i­ty of the stan­dards with the spe­cif­ic tech­ni­cal require­ments of the device – with­out com­pro­mis­ing on safe­ty, func­tion­al­i­ty, or com­pli­ance.

img 00236

Developing intrinsically safe electronics — with expertise at your side.

Get the support now, that will really get you ahead.

Your chal­lenge: ATEX-com­pli­ant devel­op­ment

Do you want to devel­op your devices in accor­dance with the require­ments of the Ex stan­dards? Then you’ve come to the right place.

As a spe­cial­ist in elec­tri­cal explo­sion pro­tec­tion, intrin­sic safe­ty and hard­ware devel­op­ment , I offer you tar­get­ed sup­port — cus­tomised, prac­ti­cal and solu­tion-ori­ent­ed.

With in-depth exper­tise, I will help you to safe­ly imple­ment the com­plex require­ments of the explo­sion-pro­tect­ed envi­ron­ment — from the ini­tial idea to mar­ket matu­ri­ty.

Whether it’s a review of exist­ing designs or the com­plete new devel­op­ment of intrin­si­cal­ly safe cir­cuits — I get involved exact­ly where you need sup­port. You ben­e­fit from a tech­ni­cal­ly in-depth, com­pre­hen­si­ble approach that both ful­fils the require­ments of the stan­dard and aims for effi­cient imple­men­ta­tion in prac­tice.

I also pro­vide reli­able and solu­tion-ori­en­tat­ed sup­port for oth­er types of igni­tion pro­tec­tion.

Get in touch now — by phone, e‑mail or con­ve­nient­ly via the online appoint­ment book­ing.

Sys­tem­at­ic con­sult­ing, devel­op­ment and doc­u­men­ta­tion

Reliable development
of intrinsically safe electronics

Do you need a protection concept for your electronics?

We devel­op a detailed con­cept and define the required pro­tec­tive ele­ments.

  • Indi­vid­ual analy­sis of your cir­cuit for crit­i­cal com­po­nents
  • Overview of pos­si­ble solu­tions
  • Clear com­po­nent rec­om­men­da­tions

Start now - book your appoint­ment direct­ly!

Development of intrinsically safe protective circuits

Com­pe­tent sup­port for your elec­tron­ics projects

Do you need a Zen­er bar­ri­er, crow­bar cir­cuit or an elec­tron­ic cur­rent lim­iter?

I will work with you to devel­op a pro­tec­tive cir­cuit that is pre­cise­ly tai­lored to your require­ments — in com­pli­ance with all rel­e­vant intrin­sic safe­ty spec­i­fi­ca­tions. The fol­low­ing aspects, among oth­ers, are tak­en into account:

  • Com­po­nent util­i­sa­tion and ther­mal eval­u­a­tion
  • Sep­a­ra­tion dis­tances and insu­la­tion accord­ing to stan­dard
  • Fault analy­sis and indi­vid­ual fault analy­sis

Arrange your indi­vid­ual con­sul­ta­tion now!

Documentation — comprehensible, standardised and future-proof

Clear and well-struc­tured cal­cu­la­tions for your reg­is­tra­tion doc­u­ments

I cre­ate all cal­cu­la­tions in a com­pre­hen­si­bly doc­u­ment­ed form so that you can under­stand them at any time and use them direct­ly for your autho­ri­sa­tion doc­u­ments.

I attach par­tic­u­lar impor­tance to this:

  • Step-by-step deriva­tion of all cal­cu­la­tion meth­ods
  • Pre­cise con­sid­er­a­tion of tol­er­ances and bound­ary con­di­tions
  • Trans­par­ent pre­sen­ta­tion, ide­al for inter­nal reuse and exter­nal review
  • Future-proof prepa­ra­tion so that you can also adapt and expand the doc­u­ments in the long term

This not only pro­vides you with a reli­able tech­ni­cal basis, but also with doc­u­men­ta­tion that impress­es test cen­tres — and is valid both inter­nal­ly and exter­nal­ly.

Make an appoint­ment now — for doc­u­men­ta­tion that impress­es audi­tors and project teams.

Your project start here

Let’s talk about your require­ments with­out oblig­a­tion — con­fi­den­tial­ly, effi­cient­ly and at eye lev­el.

In a free kick-off meet­ing, we will get an overview of your devel­op­ment goals, tech­ni­cal frame­work con­di­tions and the rel­e­vant Ex require­ments.
You will receive ini­tial ideas on how your project can be imple­ment­ed safe­ly and in com­pli­ance with stan­dards.

Of course, a non-dis­clo­sure agree­ment (NDA) can be arranged in advance — for a trust­ing and open col­lab­o­ra­tion right from the start.

Book your appoint­ment now — I look for­ward to talk­ing to you.